https://www.x-ray-forum.net/ |
|
| Types of ASTM Standards in E07 https://www.x-ray-forum.net/./22161106nx65772/astm-generel-information-f78/types-of-astm-standards-in-e07-t5.html |
Page 1 of 1 |
| Author: | Klaus [ 19.10.2019, 20:41 ] |
| Post subject: | Types of ASTM Standards in E07 |
There are mainly 5 different types of Standards in ASTM E07: Guide: an organized collection of information or series of options that does not recommend a specific course of action. A guide increases the awareness of information and approaches in a given subject area Practice: a set of instructions for performing one or more specific operations that does not produce a test result. Examples of practices include, but are not limited to: Application, assessment, cleaning, collection, decontamination, inspection, installation, preparation, sampling, screening, and training. Test Method: a definitive procedure that produces a test result. Examples of a test method include, but are not limited to: Identification, measurement, and evaluation of one or more qualities, characteristics, or properties. A precision and bias statement shall be reported at the end of the test method. Classification: a systematic arrangement or devision of materials, products, systems, or services into groups based on similar characteristics such as origin, composition, properties, or use. Specification: an explicit set of requirements to be satisfied by a material, product, system, or service. Hint: Discussion in blue color |
|
| Page 1 of 1 | All times are UTC + 1 hour |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|